Binding:
Accessory
Brand:
Arduino
EAN:
0722204636327
Label:
DFRobot
Manufacturer:
DFRobot
Model:
A000057
Size:
Warranty:
The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It is the latest addition to the Arduino family.This chip has about the same amount of flash, RAM and capability as the ATmega328 found in the UNO.
It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer?as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. This version of the Leonardo comes with all headers attached for an easy-to-use experience.Notics: This board is only supported in the latest Arduino IDE 1.0.1 so you will also need to update the IDE.
Specification:
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Microcontroller:ATmega32u4
Operating Voltage: 5V
Interface: Micro USB
Digital I/O Pins: 20
PWM Channels: 7
Analog Input Channels: 12
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM: 2.5 KB (ATmega32u4)
EEPROM: 1 KB (ATmega32u4)
Clock Speed 16 MHz
Size: 70x55x14mm
Shipping List:
Arduino Leonardo with headers x1