BestBuyZone
Product Cover Flextron FTGC-YC34-36P 36

Flextron FTGC-YC34-36P 36" Flexible Yellow Epoxy Coated Gas Line Connector with 1" Outer Diameter and 3/4" FIP x 3/4" MIP Fittings, Stainless Steel

$27.94
$25.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
High BTU Gas Connector with 1" Outer Diameter; Yellow/Stainless Steel

36" Long with 3/4" FIP x 3/4" MIP Fittings; Gas Connector is 100% Leak Tested

Designed and Engineered for Safe, Optimal Flow Rate; Up to 290K BTU Flow Capacity

FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304

For Extra High Demand Appliances, Such as Tankless and Commercial Water Heaters

Binding:

Tools & Home Improvement

Brand:

Flextron

EAN:

0854263027096

Label:

Everflow Supplies

Manufacturer:

Everflow Supplies

Model:

FTGC-YC34-36P

Size:

36 Inches

Warranty:


This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.