INSMA 12V DC 4CH Channel 433MHz Wireless Remote Control Toggle Switch with 2 Transmitter
- Features
- Description
- Similar Items
Extremely EASY to SETUP and USE. Stable and reliable performance, high receive sensitivity.
CHANGEABLE working way, control equipment turn/reverse and on/off with 4 CH Channel 433 MHz Wireless Remote Control Switch With 2 Transmitters.
STRONG SIGNAL can pass through walls, floors and doors, control receiver from any place within a reliable distance.
Learning code has HIGH-LEVEL SECURITY for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost.
packed included 1pc
CHANGEABLE working way, control equipment turn/reverse and on/off with 4 CH Channel 433 MHz Wireless Remote Control Switch With 2 Transmitters.
STRONG SIGNAL can pass through walls, floors and doors, control receiver from any place within a reliable distance.
Learning code has HIGH-LEVEL SECURITY for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost.
packed included 1pc
Binding:
Brand:
INSMAEAN:
3853878660626Label:
INSMAManufacturer:
INSMAModel:
CECOMINOD029486Size:
As shown in the imageWarranty:
Color:4CH 433MHz Output working way: 1. Self-lock: connect the JP1 with the cutting out cap. 2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either. 3. Inter-lock: Connect the Jp2 with the Cutting out cap. Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control). Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control). Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control). Using Instructions: 1. Press the learning code, the indicator flash, loosen finger, press any button of the remote control, the indicator flash 2 times and off, it means learning successfully. 2. It can learn various chips with the different code wireless remote control. 3. Remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means that it has been removed. Receiver: Size: 7.2 x 5.2 x 2.6cm 1. Working voltage: DC12V 2. Quiescent condition: Less than 6mA 3. Working temperature: -40 Degree +80 Degree 4. Receiver sensitivity: more than -105dBm 5. Working frequency: 433mhz 6. Output voltage: DC and AC is optional 7. Output current: Less than 3A 8. Max load current: 10A Remote control transmitter: Size: 5.8 x 3.9 x 1.4cm 1. Remote Distance: 200M 2. Operating Voltage: DC 12V 3. Frequency: 433mhz 4. Operating Current: 13 mAh 5. Code Type: Fixed code / Learning code Package Included: 2 x Transmitters 1 x Receiver 1 x Manual