BestBuyZone
Product Cover HiLetgo PN532 NFC NXP RFID Module V3 Kit Near Field Communication Reader Module Kit I2C SPI HSU with S50 White Card Key Card for Arduino Raspberry Pi DIY Smart Phone Android Phone

HiLetgo PN532 NFC NXP RFID Module V3 Kit Near Field Communication Reader Module Kit I2C SPI HSU with S50 White Card Key Card for Arduino Raspberry Pi DIY Smart Phone Android Phone


  • Features
  • Description
  • Similar Items
Support NFC RFID reading and writing, P2P communication with peers

Support I2C, SPI and HSU (High Speed UART), easy to change among these modes

On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI

Arduino Raspberry Pi compatible, Small Size and easy to embed into your project

RFID reader/writer supports: Mifare 1k, 4k, Ultralight, and DesFire cards, ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX), Innovision Jewel cards such as IRT5001 card, FeliCa cards such as RCS_860 and RCS_854

Binding:

Electronics

Brand:

HiLetgo

EAN:


Label:

HiLetgo

Manufacturer:

HiLetgo

Model:

3-01-1147

Size:

Small

Warranty:


The PN532 is actually a bundle of 4 libraries: PN532, PN532_HSU, PN532_I2C and PN532_SPI. You only need 2, the main PN532.h and either the I2C or SPI depending on how you connect it. The HSU is for high speed communication, which you probably won't need.
Important: Before getting it start, you need to install a few libraries like Don's NDEF library, PN532 library(Seeed-Studio's version recommanded), both of them you can find on GitHub or at below links:
Arduino Library for NFC Shield based on NXP PN532 chip:
https://github.com/jmgjmg/PN532
Arduino library for SPI and I2C access to the PN532 RFID:
https://github.com/adafruit/Adafruit-PN532
Driver for PN532 NFC chip:
https://github.com/techniq/node-pn532 Description:
1. Gilt PCB and Small dimension and easy to embed into your project
2. Support RFID reading and writing
SupportP2P communication with peers
Support NFC with Android phone 3. Typical Operating Distance have been updated to 5cm~7cm reading distance
4. Work in NFC Mode or RFID reader/writer Mode
5. RFID reader/writer supports:
1) Mifare 1k, 4k, Ultralight, and DesFire cards
2) ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)
3) InnoVISION Jewel cards such as IRT5001 card
4) FeliCa cards such as RCS_860 and RCS_854
7. Plug and play, Arduino compatible
8. Built in PCB Antenna, with 4cm~6cm communication distance
9. On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
10. Work as RFID reader/writer
11. Work as 1443-A card or a virtual card
12. Exchange data with other NFC devices such as smartphone

Package Incuded:
1*NXP PN532 NFC RFID Module V3 Kit