BestBuyZone
Product Cover Alightings LED Connector for 4Pin 5050 RGB Waterproof LED Strip Lights- Strip to Wire Quick Connection, 20 - 18 AWG Wire No Stripping

Alightings LED Connector for 4Pin 5050 RGB Waterproof LED Strip Lights- Strip to Wire Quick Connection, 20 - 18 AWG Wire No Stripping

$10.32
$10.32
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
STRIP TO WIRE CONNECTION. Alightings 4 pin led connectors suitable for 4pin 10mm 5050 IP65 WATERPROOF LED light strip, One end connect 4-conductor flat extension cable and another end for rgb led strip. The led strip connector can not work with 8mm led strip, 3528 rgb led strip, or non-standard 22 awg wire.

COMPATIBLE WITH. The led strip connector can penetrate 4pin 10 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v 5050 led strip, addressable led light strip ws2813(upgraded ws2812b led strip).

EASY & QUICK & FREELY CONNECTION. DIY rgb led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 4 conductor wire, solid wire or stranded wire, Use these 4pin connector with the 4 core extension cable to get lighting exactly where you want it.

DURABLE & POWERFUL. The 4 pin led light strip connector is durable and powerful, firmly bite through the led light strip, don't like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A ( R,G,B 3 channel ) current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.

TIPS. If your led strips are NON-WATERPROOF or NON-STANDARD WATERPROOF lights(too soft or too thin ), pls refer to this item (ASIN:B01MU7FKUK).

Binding:


Brand:

Alightings

EAN:

0647336153972

Label:

Alightings

Manufacturer:

Alightings

Model:

SYNCHKG094897

Size:


Warranty:


LED Strip Connector for 4 Pin RGB 5050 LED Strip Lights, DIY Strip to Power Lead or Strip to Strip Jumper, Terminal Only, 20AWG Wire No Included (Pack of 10)
NOTE: 1.Make sure your section of led light strip is 10mm wide 4 pin IP65 WATERPROOF RGB LED Strip.
2 .Ensure your Wire Diameter 20AWG /0.34~0.54 mm2 (exclude silicon wire) and without stripping wire.

Firmly bite the strip, no need to peel back the silicon cover
Updated version of LED strip connectors, assemble wire by yourself as needed, flexible to different project! No need to solder. Just clasp your prepared led strip section into the connector to get connected. Connect waterproof LED strip without removing surface coating silicon gel, compatible with 30-120 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.

Installation TIPS:
Strip End:
1. cut the strip straight perfectly, then fully open the clip.
2. push the strip in until it hits the backing, and pins on the connector make contact, and press hard down for several times with nose pliers to make sure the PINS puncture through the strips.
Wire End:
1. have to be separated the 4 wires (20AWG) before you insert them into the connector.
2. required to press down hard for several times with nose pliers! Ensure the contacts pierces through the insulation on the wire as there are so many non-standard wires on the market!
3. reminder: no stripping of the wires. Just be sure polarity nodes are matched up "+" to "+" and "-" to "-".
If you have any problem about installation, pls feel free to contact me.

Package:
10pcs Strip to Wire Connectors (AC-DJ-N10XB-4)