Alightings RGB LED Connector for 4Pin 5050 Non-Waterproof LED Strip Lights- Strip to Wire Quick Connection, 20 - 18 AWG Wire No Stripping
$15.38
$10.68
For Bulk orders
- Features
- Description
- Similar Items
This LED Strip Connector suitable for 4 pin 10mm 5050 non-waterproof LED strip lights, One end connect 4-conductor flat RGB extension wire and another end for rgb led strip
Connects directly to 4pin 10 mm PCB board. Compatible with both 12v and 24v 5050 rgb led strip, addressable led light strip ws2813(upgraded ws2812b led strip)
RGB strip to wire connector connect wire with length you want, without stripping wire. Compatible with 20awg rgb extension cable, solid wire or stranded wire, pls refer to ASIN: B07CVS8GW8 . connect the 4 core extension wire to get lighting exactly where you want it
Firmly bite through the led light strips, don't like old style led strip connectors only conductive connection, it is a solid connection and much stronger
If you want to connect WATERPROOF 5050 rgb led strip, Should peel off covered silicon on the surface around soldering line area
Connects directly to 4pin 10 mm PCB board. Compatible with both 12v and 24v 5050 rgb led strip, addressable led light strip ws2813(upgraded ws2812b led strip)
RGB strip to wire connector connect wire with length you want, without stripping wire. Compatible with 20awg rgb extension cable, solid wire or stranded wire, pls refer to ASIN: B07CVS8GW8 . connect the 4 core extension wire to get lighting exactly where you want it
Firmly bite through the led light strips, don't like old style led strip connectors only conductive connection, it is a solid connection and much stronger
If you want to connect WATERPROOF 5050 rgb led strip, Should peel off covered silicon on the surface around soldering line area
Binding:
Brand:
AlightingsEAN:
0647336181166Label:
AlightingsManufacturer:
AlightingsModel:
SYNCHKG106030Size:
Warranty:
NOTE: 1.Make sure your section of LED light strip is 10MM wide 4 PIN NON-WATERPROOF RGB LED Strip.
2 .Need to peel off the silicone on the surface of led light strip when you want to connect WATERPROOF LED strip.
3. Ensure your Wire Diameter 20-18AWG and without stripping wire .
Firmly bite through led light strip, don't like traditional connector only conductive connection
Updated version of LED strip connector, assemble wire by yourself as needed, flexible to different project! Both solderless for rgb led strip and wire joint. Just clasp your prepared led strip section into the connector to get connected. worry-free solution for non-waterproof 5050 4pin LED light strip connection and extension needs,extension for whatever the wire length you want to connect. compatible with 30-120 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.
Solderless Wire Joint Quick Splice Connector for 20-18awg Cable
Our products were an innovative safe and quick wire connector,peeling free,tapping free and twisting free. well waterproof and dust proof function. it greatly changes the way of wire connection .it allow any users to just insert the wire into wire joint and press cover by pliers to connect the wire safely and conveniently.
Installation Instructions:
Strip End:
1.Open the transparent cover of connector up to 90 degrees.
2 .Insert led strip section to the END of led strip connector, put the contact point of led strip on the PINS of the connector.
3. Close the transparent cap with a plier
Wire End :
1.Cut the desired wire length and insert it directly into the guide slot.
2.Make sure that the positive & negative on the led strip light surface are corresponding to the ones on the wires.
3.Close the transparent cap with a plier.
4. End of installation.
Package :
10 pcs Strip to Wire Connectors