BestBuyZone
Product Cover STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-step Resolutions for Nema 17 and 23 Stepper Motor

STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-step Resolutions for Nema 17 and 23 Stepper Motor

$55.00
$48.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
Industrial-grade Stepper Driver

Suit for Nema 17 and 23 Stepper Motor

1.0~4.2A, 20~50VDC, 1/128 Microstep Resolution

Binding:


Brand:

STEPPERONLINE

EAN:

0715776647549

Label:

OMC CORPORATION LIMITED

Manufacturer:

OMC CORPORATION LIMITED

Model:

DM542T

Size:


Warranty:


Overview:

This driver is an industrial-grade fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology.
Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors.
Compared with other analog or TB6600 chips driver, it can drive a stepper motor at much lower noise, lower heating, and smoother movement.

Key Features:

* Anti-Resonance provides optimal torque and nulls mid-range instability
* Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
* Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
* 15 selectable microstep resolutions: 1/2, 1/4, 1/5, 1/8, 1/10, 1/16, 1/20, 1/25, 1/32, 1/40, 1/50, 1/64, 1/100, 1/125, 1/128
* Soft-start with no "jump" when powered on
* 8 selectable peak current including 1.00A to 4.20A
* Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
* Automatic idle-current reduction
* Suitable for 2-phase and 4-phase motors
* Support PUL/DIR mode
* Over-voltage and over-current protections

Electrical Specifications:

* Output Peak Current: 1.0~4.2A (3.0 RMS)
* Input Voltage: +20~50VDC (Typical 36VDC)
* Logic Signal Current: 7~16mA (Typical 10mA)
* Pulse Input Frequency: 0~200kHz
* Pulse Width: 2.5μS
* Isolation Resistance: 500MΩ
* Cooling: Natural Cooling or Forced cooling
* Environment: Avoid dust, oil fog and corrosive gases
* Operating Temperature: -10℃~45℃
* Vibration: 10-55Hz / 0.15mm
* Weight: Approx.210g (7.4oz)

Packing List:

1 x Stepper Driver DM542T
1 x Full DM542T Driver Manual