BestBuyZone
Product Cover SunFounder LCD1602 Module with 3.3V Backlight for Arduino R3 Mega2560 Raspberry Pi 16x2 Character White on Blue Background

SunFounder LCD1602 Module with 3.3V Backlight for Arduino R3 Mega2560 Raspberry Pi 16x2 Character White on Blue Background

$7.99
$7.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
Display 2 lines of 16 characters including letter, number, and symbol

Working voltage: 5V; contrast adjustable with a 50K potentiometer onside

Module dimensions: 80 x 36 x 12 mm; Viewing area size: 64.5 x 16 mm

Bright blue backlight (better than green), displaying characters clearly

Low cost and easy to use, perfect for beginners

Binding:

Electronics

Brand:

SunFounder

EAN:

0606034415195

Label:

SunFounder

Manufacturer:

SunFounder

Model:


Size:


Warranty:


Introduction
LCD1602 is an industrial character type LCD that can show 16*2, i.e. 32 characters. The character generator ROM in the LCD module has already stored 160 different characters in dot matrix, including Arabic numbers, letters in low and upper case, and common symbols. for Arduino IDE, a built-in library LiquidCrystal can be called directly, and you don't need to write it, which is pretty convenient for beginners.
Its working voltage is 5V, and you can adjust the contrast via the 50K potentiometer. For the backlight, just connect pin A to 3.3V and K to GND, and then it will light up.

Note: You need to solder the Pin Headers before application.

Pins of LCD1602 and their functions:
VSS: connected to ground
VDD: connected to a +5V power supply
VO: to adjust the contrast
RS: A register select pin that controls where in the LCD's memory you are writing data to. You can select either the data register, which holds what goes on the screen, or an instruction register, which is where the LCD's controller looks for instructions on what to do next.
R/W: A Read/Write pin to select between reading and writing mode
E: An enabling pin that, when low-level energy is supplied, causes the LDC module to execute relevant instructions.
D0-D7: to read and write data
A and K: Pins that control the LCD backlight
For more details, refer to our WIKI page:
http://wiki.sunfounder.cc/index.php?title=LCD1602_Module

Package Included:
-1 x LCD1602
-16 x Pin Headers