BestBuyZone
Product Cover 10

10" Tall Single Number for Sports T-Shirt Jersey Football Baseball,Iron On, Heat Transfer, Team,t-Shirt (Style C)(1-White)

$6.99
$6.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
This listing is for 10 inch ,one number only,not multiple numbers.Professionally Manufactured Heat Transfer Vinyl Iron-On Numbers.(T-shirt not included.)

#1 choice for full-contact sports,Numbers are machine washable.Resistant to abrasion.

Best heat transfer vinyl for athletic uniforms, semi-gloss finish, Low-bleed formula and superior opacity.

Each number is ready to apply with a household iron or a professional heat press,Numbers will work on 100% Cotton, 100% Polyester, or Cotton/Poly Blends.**May not adhere to some "SHINY" 100% polyester fabrics.

Note: If you are unfamiliar with our product, please be sure to watch our video and read the manual prior to pressing onto your garment. Video: https://youtu.be/Eveljn_4uZM

Binding:

Office Product

Brand:

TeeWin

EAN:

0761465319983

Label:

TeeWin

Manufacturer:

TeeWin

Model:


Size:

1

Warranty:


THE NUMBERS HAVE BEEN CUT INDIVIDUALLY (need to line them up before heat pressing them) MADE IN THE U.S.A.
HEAT PRESS INSTRUCTIONS
Preheat garment for 2-3 seconds
Temperature: 302°F-320°F (150°C-160°C),
Pressure: Firm
Time: 8-12 seconds
Peel COOL, wait about 15 seconds
For best performance, cover and reheat for 2-3 seconds


HOUSEHOLD IRON INSTRUCTIONS

Remove all water from iron
Prepare iron at 300-340 degrees F (high temp) for 8-10 minutes
Place garment on hard - smooth surface (counter top or table protected by pillowcase) (DO NOT USE AN IRONING BOARD)
Pre-press garment for 5 seconds to remove any moisture from fabric

Place transfer face down (carrier sheet side up) on garment in desired location
Press each section covered by the iron for 15-20 seconds with medium pressure
Peel COOL?wait about 15 seconds, peel backing (carrier sheet)
For best performance, cover and reheat for 2-3 seconds.


Secret to the home iron...
1?Make sure it's hot enough.
2?Make sure your surface is HARD... can use a cutting board on a table.
3?Make sure you can apply pressure to the iron. use YOUR body weight.
4?Make sure to use a sheet of parchment paper or pillowcase,teflon sheet under your iron so that it doesn't drag. Iron on a hard surface.
5:Dry Heat is also important. You can check its adherence by lifting up a little corner of the carrier sheet. If not sticking, do again. Does take a little longer with regular iron.
Peel COOl,wait about 15 seconds, peel backing (carrier sheet)
For best performance, cover and reheat for 2-3 seconds.


CARE INSTRUCTIONS
-Do not dry clean
-Machine wash WARM with mild detergent
-Dry at normal setting
-No chlorine bleach
-Wait 24 hours before first wash
-No chlorine bleach
-Turn garment inside out