BestBuyZone
Product Cover Geekworm Raspberry Pi 4 Case, Raspberry Pi Universal HAT Size Case DIY Kit, Pi 4B Protective Acrylic Case for Raspberry Pi 4 Model B, Raspberry Pi 3B+, 3B, 2B, B+ and Raspberry Pi Hat Expansion Board

Geekworm Raspberry Pi 4 Case, Raspberry Pi Universal HAT Size Case DIY Kit, Pi 4B Protective Acrylic Case for Raspberry Pi 4 Model B, Raspberry Pi 3B+, 3B, 2B, B+ and Raspberry Pi Hat Expansion Board

$6.99
$6.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
It is a perfect acrylic case DIY kit to install raspberry pi hat expansion board with Raspberry Pi 4 Model B/ Pi 3 Model B plus / Pi 3 Model B+/ Pi3 Model B / 2B / B+ mother board together.

This is a Protection solution for non-standard boards running boards on top of the raspberry pi, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.

Compatible with Raspberry Pi 4 Model B/ Pi 3 Model B+ / Pi3 Model B/ 2B / B+ and Pi Hat expansion board (Like X705 UPS/X725 UPS).

Packing List: 1 x Acrylic Case; 1 x Pack of Screws. (The raspberry pi or the expansion board is not included)

For the installation, please refer to [Installation Guide] in the following description.

Binding:

Personal Computers

Brand:

Geekworm

EAN:

0642940884939

Label:

Geekwrom

Manufacturer:

Geekwrom

Model:

TB-471905

Size:


Warranty:


[Note]
The Raspberry Pi Board is not included; The expansion boards are not included.
This case is raspberry pi HAT size, so you can use it on any board compatible with HAT size, the only things you need to think is the height of copper space;
We strongly recommend that you can use this case with our 120 pieces/lot M2.5 standoff+screw+nuts kit to meet your needs;(for the M2.5 kit, please refer to: https://www.amazon.com/dp/B0756CW6Y2)
Please REMOVE the PROTECTIVE FILM from both sides of the pieces.

[Packing List]
1 x Acrylic Case
1 x Pack of Screws

[Overview]
It is a perfect acrylic case to install your raspberry pi hat expansion board with Raspberry Pi 3 B+ / Pi3 Model B/ 2B / B+ mother board together.
This is a Protection solution for non-standard boards running on top of the raspberry pi board, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.

[Installation Guide](x920 as a example)
1/ Mount the bottom shell to the Raspberry Pi Motherboard with 5mm screws
2/ Install the 11mm Screws on the Raspberry pi board(as the picture show)
3/ Install the Expansion board
4/ Install the 18mm screws on the expansion board(as the picture show)
5/ Finally, Install the top shell with 6mm screws (as the picture show)