BestBuyZone
Product Cover S&X Non Slip Bath Stickers,Gritty Textured Slip-Resistant Treads,0.75-Inch by 11-Inch,12 Strips Per Pack (Clear)

S&X Non Slip Bath Stickers,Gritty Textured Slip-Resistant Treads,0.75-Inch by 11-Inch,12 Strips Per Pack (Clear)

$7.99
$7.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
High Traction Non Slip Stickers - Fine-Grained surface touched like sandpaper, but feel comfortable under bare feet.(New born baby is not recommended for direct contact)

Great Grip Non Slip Strips - Provide additional grip even there's much shampoo foam or bath oil around.

Durable Long-Lasting for 2 years - Made of PET Film & Acrylic Adhesives & Double Anti Slip Grit Layer,unlike PVC material,it's waterproof and hardly worn out.

Multipurpose Use,Perfect for Bathtubs & Showers - Size:0.75"x11",12 pcs; Can also be used indoor/outdoor stairs, steps, ladders.

Easy to Apply! - Stick to any clean smooth surfaces.

Binding:


Brand:

S&X

EAN:

0711202355378

Label:

S&X

Manufacturer:

S&X

Model:

8541786597

Size:

0.75" X 11"

Warranty:


Slips, trips and falls are one of the leading causes of unintentional injuries in the US.

Have someone you love?To make your family and pet safer,make yourself ease of mind! Do something that matters,S&X will help them stay safe!Thank you!

S&X Anti Slip Sticker is your good helper!
Our 5 PROS:

1.Grit 100 crystal glass sand surface,maximum grip to prevent slipping.
2.PET film based material,quality assurance for 3 to 5 years.
3.Temperature Range:-40°C ～ 80°C
4.3-Layer resin surface texture coating,Strong and Durable
5.Strong backing presure adhesive,waterproof and resists peeling off

Specifications

- Size: 0.75" X 11"

- Quantity:12 pcs/pack

- Color:Clear/Black/Gray/Yellow/Blue/Rosy

- Usable Rang:Smooth and clean surface,such as ceramic tile/sealed or painted wood/metal/board/plastic/glass,etc.

- Service Life:2-3 Years in general purpose.

- Notice!Not recommended to use on uneven,rough or porous surfaces.If insist,please prime coat with a primer for proper adhesion


How to use

1.Use appropriate cleaner or solvent wipe to clean surfaces, make sure surface is clean, dry, smooth and above 50°F.(Recomend to heat the surface with a hair dryer for better adhesion).

2.Peel the strip off and press from one end toward the other.Make sure all outer edges attached firmly to the surface.

3. Recommend to use a rubber hand roller or rubber mallet ensure entire sticker is in contact firmly with the surface.

4.Keep free of water for 6 hours.

Have a nice bathtime :)