BestBuyZone
Product Cover 5 Ft 10AN AN10 (5/8

5 Ft 10AN AN10 (5/8") Universal Braided Stainless Steel Oil Fuel Gas Line Hose

$19.89
$19.89
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
Application for Racing Fuel, Pump Gas, Fuels with Ethanol, Alcohol Based Fuels, Motor Oil & Coolant etc

Length:5 Ft , Inner Diameter: 14.2 mm (0.56"), Outside Diameter: 20.24 mm (0.80"), Universal Accessory, Easy to Operate

Good Quality and Durability, Working Temperature: -40F to 248F (-40°C to + 120°C) under most operating conditions; Working Pressure:1015 PSI - Burst Pressure: 5075 PSI

Braided fuel hose with special hand feel

Perfect racing fittings for fuel injection use

Binding:


Brand:

Vincos

EAN:


Label:

Vincos

Manufacturer:

Vincos

Model:


Size:


Warranty:



Specification:
**Color:Silver
**Size:AN-10
**Inner diameter(ID): 14.2 mm 0.56inch
**Outside diameter(OD):20.24mm 0.80inch
**Inner hose Materail:CPE synthetic rubber
**Outside Materail:Stainless Steel
**Working Temperature:-40F to 248F (-40°C to + 120°C) under most operating conditions.
**Working Pressure:1015 PSI
**Burst pressure: 5075 PSI

Application:
1.For use with fuel systems, methanol, oils, lubricants, coolant system and vacuum applications.
2.Suitable for fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes.
3.This hose isn't suitable for brake fluid and is not to be used near extreme heat sources such as a turbocharger.

Package Includes:
5 Ft Stainless Steel Braided Fuel Hose

How to Cut:
For cutting your new steel braided hose to length you will need:
* Cutting wheel/ hack saw/ or steel braided hose cutters
* Duct tape or electrical tape (work best)
1.Measure your hose and find desired length.
2.Tape hose at measured length needed for application.
3.Cut hose threw the tape you have placed.(This keep the steel braid from fraying)
4.Remove the tape.
5.Slide one end of hose into end of fitting.
6.Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7.Make sure all connection are tight.