MakerFocus 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board WiFi Kit
$19.99
$19.99
For Bulk orders
- Features
- Description
- Similar Items
[Note1]: After some customers reflected the reversed connectors, we have modified the connectors now, so all the new batteries are correct correct polarity now, you don't need to switch the polarity of the two wires. Thanks a ton for every customer's suggestion and support.
[Note2]: The maximum operating current of this battery is only about 1A, cannot be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.
[Usage]: This product interface is JST1.25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.25 mm connectors.
[Standard Charging Method]: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current≤ 0.05C. Working Current: 1.5A
[Charge current time]: Standard Charging: 0.2C (8 hours); Fast charging: 0.5C (2.5 hours).
[Note2]: The maximum operating current of this battery is only about 1A, cannot be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.
[Usage]: This product interface is JST1.25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.25 mm connectors.
[Standard Charging Method]: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current≤ 0.05C. Working Current: 1.5A
[Charge current time]: Standard Charging: 0.2C (8 hours); Fast charging: 0.5C (2.5 hours).
Binding:
Personal ComputersBrand:
MakerFocusEAN:
0192684018591Label:
MakerFocusManufacturer:
MakerFocusModel:
Size:
Warranty:
4pcs 3.7V Lithium Rechargable Battery, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Matched with ESP32 Development Board WIFI Kits for Arduino Nodemcu
Features:
1. Note: The maximum operating current of this battery is only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.
2. This battery interface is JST 1.25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.25 mm connectors.
Specification:
Standard Voltage: 3.7V
Rated Capacity: 1000mAh
Weight: About 17g
Size: 8.5*25*40（mm）
Working Current: 1.5A
Overcurrent protection: 2~3A
Overcharge limit pressure: 4.25±0.05V
Over-voltage limit pressure: 2.45±0.30V
Standard Charging Method: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current≤ 0.05C.
Charge current time: Standard Charging: 0.2C (8 hours); Fast charging: 0.5C (2.5 hours).
The maximum charging current: 0.5C
Continuous Dishcarge Current: 0.5C
The maximum discharge current: 1C
End-off voltage: 2.75V/pcs
Allowable charging temperature: 0℃ ~ +45 ℃
Allowable discharge temperature: -10 ~ +60 ℃
Allowable storage temperature: -10 ~ +40 ℃( within 3 months); -10 ~ +30 ℃ ( within 6 months).
Package Including
4 * 1000mAh 852540 3.7V Lithium Rechargable Battery