① BUILD-IN CLUTCH disengages from drive-in function while reaching the workpiece.
② Line up the screw, put this driver on the screw, then start drilling.
③ It'll click when it reaches the depth, but if you lift off now it'll strip the screw a little. Instead, let the drill stop, then lift.
④ The clutch is position sensitive, so it disengages when it hits the wood, but reengages when you lift off.
⚠ Takes a couple tries to get used to, but not complicated.
⚠ To remove and change the screwdriver bits, you simply need to pull out the bit with pliers and insert the new hex 1/4 bit.
⚠ Every standard hex 1/4 and 1 inch long screwdriver bit type can fit in the setter tool.
⚠ Dimpler comes with 2pcs of top quality impact ready PH2 & 2pcs of T25 screwdriver bits.
You can also use your own Torx, Allen, Slotted, Robertson or other types of 1" bits.