KeeYees Pro Micro ATmega32U4 5V 16MHz Micro USB Development Board Module Microcontroller for Arduino IDE Leonardo Bootloader (Pack of 3pcs)
$18.99
$18.99
For Bulk orders
- Features
- Description
- Similar Items
ATMega32U4 running at 5V/16MHz, maximum voltage on the RAW pin is 9V, recommended voltage 6-7V.
Supported by Arduino IDE V1.0.1; 4 x 10-bit ADC pins, 12 x Digital I/Os; Rx and Tx Hardware Serial Connections.
Just connect to the On-Board micro-USB connector for programming. (If this module cannot be recognized by your computer, please refer to this link to install the driver https://www.arduino.cc/en/Guide/DriverInstallation)
The PRO Micro board can be powered via the micro USB connection or with an external power supply.
Please click the [Tool] and choose the module [Arduino Leonardo] when you open the Arduino IDE software.
Supported by Arduino IDE V1.0.1; 4 x 10-bit ADC pins, 12 x Digital I/Os; Rx and Tx Hardware Serial Connections.
Just connect to the On-Board micro-USB connector for programming. (If this module cannot be recognized by your computer, please refer to this link to install the driver https://www.arduino.cc/en/Guide/DriverInstallation)
The PRO Micro board can be powered via the micro USB connection or with an external power supply.
Please click the [Tool] and choose the module [Arduino Leonardo] when you open the Arduino IDE software.
Binding:
Personal ComputersBrand:
KeeYeesEAN:
0705883356052Label:
KeeYeesManufacturer:
KeeYeesModel:
Size:
Pack of 3pcsWarranty:
Features:
ATmega32U4 running at 5V/16MHz
Supported under Arduino IDE v1.0.1
Recommend power supply for board: 6-7V, less than 9V
On-Board micro-USB connector for programming
4 x 10-bit ADC pins, 12 x Digital I/Os
Rx and Tx Hardware Serial Connections
How to use?
1. Connected to computer. (If this module cannot be recognized by your computer, please refer to this link to install the driver https://www.arduino.cc/en/Guide/DriverInstallation)
2 Opened Arduino IDE and loaded Blink sketch.
3. Set board to Leonardo and selected the appropriate COM port (It showed up in the list already identified as a Leonardo).
4. Connected an LED to pin 9 and modified the sketch accordingly.
5. Hit upload and within a few seconds having a blinking LED.
Package Includes:
3 x Pro Micro ATmega32U4 5V 16MHz Module for Arduino
KeeYees: Best choice in various Electronic Modules & Components, DIY Parts and Tools to
support your work and design challenges from Home, School to Industrial applications!