SOLDER SEAL WIRE CONNECTOR --SOLDER AND SEAL IN ONE QUICK CONVENIENT STEP
1.Waterproof Wire Connectors would prevent wires from corrosion.
2.Solder and Hot Melt Adhesive inside can be perfectly Waterproof.
3.Transparent Sleeve of the butt connectors provide Visual Inspection.
4.Dual-walled design tubing: polyolefin tubing on the outside and hot melt adhesive inside
5.You can control the operating temperature and heating time.
Compliant with ROHS, ISO 9001:2008, SGS and CE standards.
Operating temperature range:
Shrinkage ratio is 2:1
Minimum temperature for solder to melt: 138°C (280 ℉)
Minimum shrink temperature: 80°C (176 ℉)
Operating temperature :-55℃ - 125℃
Note: The Minimum and Maximum Temp. are the temp. for connector surface.
Tips.
1.Keep rotating during heating with a heat gun.
2.Be careful not to heat over from the beginning, it can cause tube melting damage while the solder ring is still not melting.
3.Do not a too close heating gun on the solder connector, keep about 5cm from heat targeted connectors surface