Anmbest 5PCS 2S 7.4V 8.4V 8A 18650 Charger PCB BMS Protection Board for Li-ion Lithium Battery Cell
- Features
- Description
- Similar Items
HIGH-ACCURACY, HIGHLY DURABLE: High-accuracy voltage detection circuit, fine workmanship and durable, Effective life greater than 50000 hours.
MULTIPLE PROTECTION: Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; A combination of 4 safety features that work together to provide ultimate protection for your devices, your chargers and most importantly:you.
LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
WIDELY APPLICATIONS: Use for variety of capacities and various shapes 3.7V lithium batteries,Massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
ATTENTION: Strictly according to the diagram wiring: B+: Battery V+ Positive, B-: Battery V- Negative, P+: Output / Charging V+, P-: Output / Charging V-, MB: The connection point between the batteries.Otherwise it will cause damage to the chip. Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
MULTIPLE PROTECTION: Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; A combination of 4 safety features that work together to provide ultimate protection for your devices, your chargers and most importantly:you.
LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
WIDELY APPLICATIONS: Use for variety of capacities and various shapes 3.7V lithium batteries,Massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
ATTENTION: Strictly according to the diagram wiring: B+: Battery V+ Positive, B-: Battery V- Negative, P+: Output / Charging V+, P-: Output / Charging V-, MB: The connection point between the batteries.Otherwise it will cause damage to the chip. Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
Binding:
Brand:
AnmbestEAN:
7071299062492Label:
AnmbestManufacturer:
AnmbestModel:
Size:
Warranty:
2S 8A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module. This small and smart battery charger protection module comes with the various features like Short circuit protection, Overcharge protection, Over-discharge protection, Overcurrent protection. It is very easy to install and convenient to use in all your DIY portable projects.
Specifications:
Charging Voltage: 8.4V-9V
Overcharge Voltage Range: 4.25V-4.35V plus or minus 0.05V
Overpressure Voltage Range: 2.3V-3.0V plus or minus 0.05V
Upper Limit Operating Current: 8A
Upper Limit Instantaneous Current: 16A
Quiescent Current: less than 10uA
Internal Resistance: less than 300mΩ
Effective Life: more than 50,000 hours
Operating Temperature: -40- +50 Celsius
Storage Conditions: -40- +80 Celsius
Short circuit protection: Can be protected, charge recovery required
Size: 41mm x 8mm x 2.2mm/ 1.61″ ×0.31″×0.09″(L x W x H)
Attention:
Strictly according to the diagram wiring: B+: Battery V+ Positive, B-: Battery V- Negative, P+: Output / Charging V+, P-: Output / Charging V-, MB: The connection point between the batteries.Otherwise it will cause damage to the chip.
Do not mix the good battery and poor battery to use.
The internal resistance of 3 battery capacity are closer will be better.
Tips:
the product must be connected to a 8.4V charging voltage through p+ and p- before it will create voltage on pads.Or you can activate this BMS by momentarily shorting b- and p-.
Package inlcuded:
5x 2S lithium Battery Protection Board