2835 3528 2 Pin 8mm LED Strip Connector - DIY Strip to Wire Quick Connection for 12v 24v Single Color Led Strip Lights (Pack of 10)
$9.89
$9.89
For Bulk orders
- Features
- Description
- Similar Items
Alightings 2 pin connector suitable for 8mm SMD 3528 2835 3014 5630 single color LED light strip. One end connect 2-conductor flat extension cable and another end for led strip. These led strip connectors can not work with 10mm led strips, rgb led strip, or non-standard 22awg wire.
The 3528 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape. Should peel off covered silicon on the surface around soldering line area, if you want to connect WATERPROOF LED strip light.
DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
The led light strip connector is durable and powerful, firmly bite through the led light strip, don't like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
The package includes 10pcs strip to wire connectors. Provide with a full 30 days money-back guarantee for any unsatisfied order.
The 3528 connector can penetrate 2pin 8 mm PCB board and 20 gauge wire without stripping. Compatible with both 5v 12v and 24v led tape. Should peel off covered silicon on the surface around soldering line area, if you want to connect WATERPROOF LED strip light.
DIY led strip to wire connector in length you want, no mater board-to-wire input or board-to-board jumper, extension distance and angle are no more problems to you. Compatible with 20 gauge 2 conductor wire, solid wire or stranded wire, Use these 2-pin connector with the 2 core extension cable to get lighting exactly where you want it.
The led light strip connector is durable and powerful, firmly bite through the led light strip, don't like old style led connectors only conductive connection, it is a solid connection and much stronger. It can support up to 5A current carrying, which allow you extending longer and safer continuous LED strip lighting by single connector.
The package includes 10pcs strip to wire connectors. Provide with a full 30 days money-back guarantee for any unsatisfied order.
Binding:
Brand:
AlightingsEAN:
0604213017963Label:
AlightingsManufacturer:
AlightingsModel:
Size:
Warranty:
LED Strip Connector 2 Pin 8mm - DIY Strip to Wire Quick Connection for SMD 3528 2835 Led Strip Lights(Pack of 10)
NOTE: 1.Make sure your section of led light strip is 8mm wide 2 pin IP20 Non-WATERPROOF LED Strip.
2. Ensure your Wire Diameter 20AWG /0.34~0.54 mm2 (exclude silicon wire) and without stripping wire.
3. Need to peel off the silicone on the surface of led lights when you want to connect WATERPROOF LED strip light.
DIY Strip to Wire Quick Connection
Updated version of LED strip connectors, assemble wire by yourself as needed, flexible to different project! No need to solder. Just clasp your prepared led strip section into the connector to get connected. Connect waterproof LED strip need to peel off the silicone on the surface, compatible with 30-120 LEDs/M strip, made of flame retardant material, safely use. Support high current LED strip lights.
Installation TIPS:
Strip End:
1. cut the strip straight perfectly, then fully open the clip.
2. push the strip in until it hits the backing, and pins on the connector make contact, and press hard down for several times with nose pliers to make sure the PINS puncture through the strips.
Wire End:
1. have to be separated the 2 wires (20AWG) before you insert them into the connector.
2. required to press down hard for several times with nose pliers! Ensure the contacts pierces through the insulation on the wire as there are so many non-standard wires on the market!
3. reminder: no stripping of the wires. Just be sure polarity nodes are matched up "+" to "+" and "-" to "-".
If you have any problem about installation, pls feel free to contact me.
Package:
10pcs Strip to Wire Connectors (AC-SE-N8XB-2)