DC-DC Buck, DROK Power Supply Module LM2596 DC Buck Converter 5V-36V to 1.25-32V Step Down Voltage Regulator Stabilizer 3A 5A CC Volt Transformer Reducer
$13.59
$13.59
For Bulk orders
- Features
- Description
- Similar Items
PARAMETER --- input voltage range DC 5V-36V; output voltage DC 1.25V-32V continuously adjustable; max output current 5A, recommend use of within 4.5A; max power 75W, recommend use of within 50W.
MULTIMETER --- detect and display voltage, current, power, can be used as voltmeter/ammeter/power meter.
PROTECTION --- over-current protection; short-circuit protection; over-temperature protection.
CC & CV MODE --- with constant current mode & constant voltage mode.
OTHER FEATURE --- USB port; currently mode indicator & charging status indicator; protective shell; calibration function.
MULTIMETER --- detect and display voltage, current, power, can be used as voltmeter/ammeter/power meter.
PROTECTION --- over-current protection; short-circuit protection; over-temperature protection.
CC & CV MODE --- with constant current mode & constant voltage mode.
OTHER FEATURE --- USB port; currently mode indicator & charging status indicator; protective shell; calibration function.
Binding:
ElectronicsBrand:
DROKEAN:
Label:
DROKManufacturer:
DROKModel:
Size:
Warranty:
DROK DC-DC Step Down Converter
Parameters:
Name: DC-DC power supply voltage step down buck converter module
Input voltage : 5V-36V (input should at least 1.5V higher than output)
Output voltage :1.25-32V (continuously adjustable, defaulted 17V)
Output current : 5A max (recommended within 4.5A)
Output power: 75W max (Recommended within 50W. If the voltage difference is big, please reduce power)
Operating temperature: -40 ~ +85℃
Operating frequency: 180KHz
Conversion efficiency : up to 96%
Short circuit protection: Yes
Overtemperature protection: Yes (automatically shut off the output when over-temperature)
Input reverse polarity protection: No (please add large-current diode at input if necessary)
Installation: 4x 3mm screws
Wiring: (solder terminals) V-IN is input, V-OUT is output.
Feature:
1. With constant current & constant voltage mode.
2. Display voltage, current and power, can be used as voltage meter/ current meter/ power meter.
3. With indicator light to indicate CC/CV mode & charging status.
4. With current limiting protection, module won't burn even if output is shorted.
5. On-board voltage & current can be manually calibrated.
6. High power, high efficiency, low ripple.
7. With USB port, can directly charge for your digital device.
8. With protective case.
Application:
1. Used as an ordinary DC buck converter module with over-current protection;
2. Used to diy a solar power controller;
3. Used as a constant current LED driver module.
Package Included:
1x DC-DC Buck Converter