Application:
Can be applied using a brush, roller, or single component sprayer to provide a seamless and fully adhered membrane to most substrates.
Ensure a clean, dry surface and use biodegradable wood cleaner. Fill gaps, seams, and screw holes with a high quality wood filler.
For a textured/grip surface, apply 2 heavy coats with a textured roller and then 2 heavy coats of Smooth Coating with a standard roller. Coverage should be at least 100 square feet per gallon per coat. For larger areas, pour onto surface and roll.
Apply the next coat as soon as possible, not allowing extended time between if possible. Ensure coating is dry to the touch with no uncured material underneath before moving on to the next coat.
Avoid hot, direct sunlight during application and apply about 50 degrees Fahrenheit. Remove painters tape while still wet.
Drying Time:
At 25 degrees Celsius and 50% relative humidity, fully cures in 72 hours at 1mm. Curing time increases in colder temperatures or higher humidity so environmental conditions must be considered before application.