Product description
Name:IPAD 9.7-3p
This product will not fit models not listed in the product page.
please visit device > settings > about/info or check the back of your device to check your model.
Compatible with:
*iPad Air 1st Gen (A1474, A1475, A1476)
*iPad Air 2nd Gen (A1566, A1567)
*iPad Pro 9.7-inch (A1673, A1674, A1675)
*iPad 9.7 5th Generation 2017 (A1822, A1823)
*iPad 9.7 6th Generation 2018 (A1893, A1954)
Kit Contains: 3 xGLASS Screen Protector, 3xWet/Dry Wipes, 3xDust Removal Stickers, 3xMicrofiber cloth
Installation:
Overall, the secret is use the alignment stickers, take off the backing on sticky side, with the alignme tabs still attached gently lower the screen on and don't touch it. Wait 10-20 seconds and watch...the screen will attach itself with no bubbles.
The detailed steps :
1: Power off and cool. Install in a dust-free environment. Use the wet wipe to clean dust,dirt,oil, or stain and finish by using the dry wipe.
Not touch the screen or glass or let dust/lint get in between during the next steps.
2: Hold onto the sides of the protector; peel the clear sheet off revealing the adhesive sides of the glass. Not touch them. Align the bottom (or top) of the glass with your display and lay down gently.
3: Make sure that the adhesive adheres completely on to the screen.Gently press the center of the glass and slide your finger along the center of device and the adhesive will spread out evenly.
4: If any bubbles remain, you can use a soft lint-free cloth and push the bubble towards the edge of the glass. If there are lint and dust, repeat step 1.
You can also gently lift one corner (closest to the air bubble) and release so it tries to apply itself on the glass again.