BestBuyZone
Product Cover REX Sewing Machine Electric servo Motor

REX Sewing Machine Electric servo Motor

$109.00
$109.00
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
✅ POWER SAVING: Draws minimal electricity, no noise, no vibration when the machine is not running. Energy-efficient - saves up to 70% of electricity.

✅ GREAT PERFORMANCE: High Torque D.C. Electronic Brushless Servo Motor 3/4 HP (550 Watt)

✅ EASY TO USE: Easy to adjust speed & motor direction with buttons. Comes with adjustable belt tightener.

✅ BEST FOR HEAVY-DUTY MACHINES: Works well on heavy-duty machines. The motor is lightweight and weighs approx. 10 - 12lbs.

✅ ADDITIONAL ITEMS INCLUDED: Belt guard, pulley & mounting hardware included. It uses the same mounting holes as a clutch motor. No clutch disc present.

Binding:

Office Product

Brand:

Rex

EAN:

0787639225362

Label:

REX

Manufacturer:

REX

Model:

1000

Size:


Warranty:

90 DAYS WARRANTY
Rex Industrial Sewing Machine Servo Motor

The Speed Setting:
- UO Press R; Display UO, Press M to adjust; Display the number 5 to 70; {5 represents a minimum speed of 500 rpm, 70 represents the maximum speed of 7000 rpm}.
- Example 1: You need 3500 rev/min Press R: Display UO; Press M to adjust; Digital display 35; Press L to save.
- Example 2: You need 500 rev/min Press R: Display UO; Press M to adjust; Digital display 5; Press L to save. 2) Upper and lower needle position set; U1 Press R; Display U1; Press M to adjust; Display number 0 to 1; {0 for the next stop pin; 1 for the stop pin}; Press R to save
- Example 3: Reversing settings; U2 Press R; Display U2; Press M to adjust; Display number 0 to 1; {0 clockwise; 1 is the reversed}, Press R to save.
- Example 4: Location parameter setting; U3 Press R; Display U3; Press M to adjust; Display the number 8 to 20; (The smaller the number, the more slowly, but the positioning is more accurate; The bigger the number, the faster the location, the more not allowed), Press R to save.
- Example 5: Slow start setting U4 Press R; Display U4; Press M to adjust; Display the number 0 to 9; Press R to save Example 6: Other display instructions: {1}When the motor stall failure occurs, when it display E1, the motor does not work, press the R key to recovery; Many times, it is recommended to reduce the load or contact your dealer. {2}When the stream or under voltage fault occurred, when the motor display E2, the motor does not work, press R key to recovery, many times, it is recommended to reduce the load or contact your dealer. {3}When the motor has the Hall signal error, it display E4, check the motor and controller plus connection is intact, press R key to recovery many times, if not, please contact your dealer.
- Example 7: Restore factory settings: In the U mode, press the M button for 3 seconds or more. The set parameters are reset to the factory default state.

Scroll up