BestBuyZone
Product Cover Kootek Cabin Air Filter for CF10285 Toyota/Lexus/Scion/Subaru, Active Carbon Against Bacteria Dust Viruses Pollen Gases Odors AT285

Kootek Cabin Air Filter for CF10285 Toyota/Lexus/Scion/Subaru, Active Carbon Against Bacteria Dust Viruses Pollen Gases Odors AT285

$7.99
$7.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
Filters road dust and pollen ranging from 5-100 microns to dramatically improving in-vehicle air quality

Combine active carbon and soda woven in to absorb common odors drawn from outside sources

Enhances HVAC performance, Recommended replacement every 12 months or 12,000 miles

Replacement for FRAM CF10285, Replacement Toyota for part # 87139-02090, 87139-06040, 87139-07010, 87139-50060, 87139-50100, 87139-52020, 87139-52040, 87139-YZZ08. Note: NOT for 2016 Prius.

Easy and simple installation, refer to the description below. Size:8.46*7.56*1.10 inch; weight: 6.6 oz

Binding:


Brand:

Kootek

EAN:


Label:

Kootek

Manufacturer:

Kootek

Model:


Size:


Warranty:


Compatible model and year list:(including but not limited to)


LEXUS: CT200H(2011-2017), ES300H(2013-2017), ES350(2007-2017), GS300(2006), GS350(2007-2011), GS430 (2006-2007), GS450h(2007-2011), GS460(2008-2011), HS250h(2010-2012), IS250(2006-2013), IS350(2006-2013), IS-F (2008-2013), LF-A (2012), LS460 (2007-2017), LS600h(2008-2015), GX460(2010-2017), LX570(2008-2017), NX200t(2015-2018), NX300h (2015-2016), RX350 (2010-2015), RX450h (2010-2015).

TOYOTA: Avalon(2005-2018), Camry(2007-2017), Corolla(2009-2018), Corolla iM (2017-2018), Matrix(2009-2014), Prius(2010-2015), Prius C (2012-2018), Prius Plug-in (2012-2015), Prius V (2012-2017), Venza(2009-2016),Yaris(2007-2018), 4Runner(2010-2018) Highlander(2008-2018), Land Cruiser(2008-2018), RAV4(2006-2018), Sequoia(2008-2018), Sienna(2011-2018), Tundra(2007-2018).

PONTIAC: Vibe (2009-2010)


SCION: iM (2016), tC (2011-2016), xB (2008-2015), xD (2008-2014)


SUBARU: Legacy(2010-2018), Outback(2010-2018)

Installation:
1.Open the glove compartment
2.Pull the arm free from the glove compartment
3.Press inward on the sides of the glove compartment to disconnect the stops.
4.Slide the filter frame out from the housing
5.Remove the old filter from the frame carefully
6.Install the new filter in the frame and make sure the direction of air flow is the same as the arrow on the side of filter indicates.
7.Slide the frame back into the housing and make sure it snaps securely