Portable Battery Nickel Sheet Spot Welder Set PCB Circuit Board Battery Spot Welding Machine Pen
- Features
- Description
- Similar Items
It is recommend to install the product by the people who have basic electrical knowledge and hands-on ability.
Equipped with a 3.7-4.2V 4.5ah power lithium battery with a discharge rate of 100C and a load capacity of about 400A.
Comes with a charging control module, which charges the battery through the USB port, and is charged with hundreds of welding points on commonly used nickel-plated sheets within 0.1mm-0.15mm.
Equipped with a 3.7-4.2V 4.5ah power lithium battery with a discharge rate of 100C and a load capacity of about 400A.
Comes with a charging control module, which charges the battery through the USB port, and is charged with hundreds of welding points on commonly used nickel-plated sheets within 0.1mm-0.15mm.
Binding:
ElectronicsBrand:
GenericEAN:
Label:
xmManufacturer:
xmModel:
Size:
Warranty:
Installation Method:
Weld the buzzer according to the schematic (differentiate the negative and positive electrode)
Weld the negative wire to the negative output (If you don't have a soldering iron with large power, you can increase the temperature by heating the soldering iron)
2.Fix the battery on the back of the circuit and the copper ears of the output wire with screws (differentiate the negative and positive electrode and be careful of short circuit copper foil and components of the circuit board)
3.Fully charge after assembly (to ensure battery durability, we set a lower charging current, the charging time is about 4 hours)
Specifications:
Condition: New
Length of welding pen: 10 cm
Length of 10AWG line: 26 cm
Packing includes:
1 x Battery (PC)
1 x Circuit board (PC)
2 x Copper welding pen with 10AWG line (PCS)
1 x Buzzer (PC)
2 x Screw (PCS)
2 x Insulated heat shrinkable tube (PCS)
1 x USB charging cable (PC)
1 x 80cm 0.1x7mm nickel sheet (PC)