Binding:
Brand:
BWSS
EAN:
0053554306012
Label:
BWSS
Manufacturer:
BWSS
Model:
Size:
Warranty:
#Working Voltage: AC 85V-250V
#Working Frequency: 433Mhz
#Max Load: 10A Relay ( have better load less than 5A
#PCB Size:75*58*15mm;Case Size :95*62*29mm
#Function: Limit & Wire External Button
#Original State OFF, (Suddenly, the electricity was cut off, then comes again, the State still is OFF, you need manual turn it ON)
Out State: Momentary Latched Adjusted by the Jumper on the Receiver
★Momentary---Jumper on 1 Pin
★Latched----Jumper on "L&S"
★Momentary ----Press button"Up", the Motor Forward, Release is Stop.Press Button "Down", the Motor Reverse, Release is Stop.
★Latched----Press button "Up", the Motor Forward, Press Button "Stop" is stop.Press Button "Down", the Motor Reverse, Press Button "Stop" is stop
☀When the relay is activated, the buzzer synchronize with a "beep" prompt.
☀ When the receiver output state is "Latched", we have set it 0.5s time delay for forwards and reverse, it is the Protection function.
☀We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it.
Learning Code :
Press the learning button for 1 time,the learning indicator flashes slowly,Then press the transmitter button up (first button default for forward) ,the learning indicator flash 5 times and OFF,It mean the first button learning Successfully
Press the learning button for 2 times,the learning indicator flashes slowly,Then press the transmitter button down (second button default for forward) ,the learning indicator flash 5 times and OFF,It mean the second button learning Successfully(Third button default for stop ,When the jumper set for Latched)
Clear code :
Press the learning button on the receiver for 5s,the learning indicator will flash 3 times and OFF, It mean all the transmitter code in the receiver have been cleared.
Package Include:
1 x Receiver
2 x Transmitter(Battery included)